The UM-650 is a particularly robust bag welder, designed for very thick bags or conflicting products.
The new generation UM-650 incorporates important advances:
Digital electronic controller with built-in microprocessor.
Two-line backlit LCD display and an intuitive polycarbonate control panel for easy reading and adjustment of work parameters (welding...
Machines
Contact our team of consultants to find the perfect packaging solution for your product.
+34 93 298 88 40
These small table-top sealers have been designed to close poly-paper, paper-paper, heat-weldable aluminum and other laminated material bags.
This is our most basic model of weigher.
Made of AISI-304 stainless steel, this machine can work in automatic mode adapted to a vertical packaging machine, but it is also very common to see it in semi-automatic lines, working in combination with a continuous sealer.
Based on model RVB-700, the pneumatic sealers RVB-700 VACUUM and RVB-700 VACUUM-GAS have been specially designed for those applications in which you need vacuuming (or vacuuming and gassing) big volume bags difficult to manipulate in vacuum chambers.
This new model has been designed by ROVEBLOC to fully meet the latest requirements of the food industry. A solid construction in stainless steel, isolation of the electrical panel (IP56), a friendly use programmable PLC and a high quality 8 mm. seal are some of its main advantages.
The Cartopack Vacuum is a pneumatic sealing machine for sealing bags of complex materials.
This machine allows to obtain high security seals on bags of complex materials (thick or thin, with or without gusset), in the option with Teflon flat electrode it also allows the sealing of bags of thick plastic materials.
The FARMATUB responds to the need for an economical and safe machine to seal pharmaceutical or cosmetic tubes in small series.
The FARMATUB is a compact but powerful impulse sealer that can seal plastic or PVC tubes as well as laminated tubes.
Operation is very simple: the operator presses the lever to open the jaws and place the tube to be sealed between...
Tabletop machine, for the closing of Polythene, PVC and laminated pipes.The electrodes are 400 mm. long, being able to weld several pipes at the same time, thus increasing productivity.It is operated pneumatically, by means of two push buttons or by pedal (compressed air required).A user-friendly LCD display allows precise control of welding and cooling...
Our new tube sealer machine Rovetub Plus 2 performs ultrasonic sealing of the pipes and has a system for cutting the excess of material beneath the seal, achieving a grooved weld of 6 mm. with an astounding look, the same as that obtained with automatic tube sealing machines.The rovetub Plus 2 has a methacrylate protection and a safety system by means of...
Our pneumatic sealing tables are custom-made according to the customer's needs, with the following options:
- sealing length from 400 to 2000 mm.
- Heating from one or both jaws.
- Various types of sealing wire available.
- Manual or automatic cutting system.
- Reel holder.
- Other specifications to be commented.
This sealer is used for sealing heavy bags lying on a pallet or palletbox.
This model has been specially designed to seal this kind of bags in a quick and reliable way with just one seal. The sealing jaws can be easily placed over the pallet. A hydraulic system allows the operator to make the sealing head go up and down. The feet of the pallet sealer...
This set consisting of a set of electrodes and a control box is custom-made and can be coupled to any type of special machines including a welding unit.
The sealing bars can be made to the requested size. The control box controls the welding and cooling times, and is prepared to receive and return a signal at the beginning and end of the cycle.
Contact...
These are the smallest machines in our range of sealing machines.
These sealers are directly plugged into the power supply and do not have a temperature regulator.
They need three or four minutes of preheating before they reach a stable temperature and are ready to seal.
These are the smallest machines in our range of sealing machines.
These sealers are directly plugged into the power supply and do not have a temperature regulator.
They need three or four minutes of preheating before they reach a stable temperature and are ready to seal.
These are the smallest machines in our range of sealing machines.
These sealers are directly plugged into the power supply and do not have a temperature regulator.
They need three or four minutes of preheating before they reach a stable temperature and are ready to seal.
Sealing machine for heavy bags placed on pallets or pallet-boxes.
This model has been specially designed to place the sealer in such a way that the jaws are on the top center of the pallet, in order to make the sealing, vacuum-sealing or vacuum-gas-sealing operation comfortable for the operator.
The system for raising and lowering the jaws is hydraulic,...